Hot-rolled V-shaped Channel

Product feature:

• Contains flat tooth or swallow-tail-shaped tooth inside inner groove of the channel.Angle of swallow-tailed is basically 62°/70°
• Body of channel is formed by one time of hot-rolling. Fracture surface of square-shape or U shape,multiple material of Q235B, Q345B, Q420B, weather-resistance steel, cold-resistance steel,stainless steel etc.
• Use cooperatively with round shape anchor stick.

                 Specification of round-shape anchor hook

                 Diameter of anchor stick:8mm/10mm/14mm

                 Height of stick:72mm/82mm/92mm/100mm

                 Diameter of anchor head: 18mm/20mm

• Hot/cold riveting,welding,rivet-welding on body of channel,same material as channel body.
• Distance of anchor stick: no more than 250mm
• T shape bolt matches with channel body. Feature of tooth same as tooth inside channel groove. See (c)

Type of product:

• Classified by shape: straight shape or arc shape.
• Classified by type of anchor stick: swallow-tailed shape(a)  or swallow-tailed-tooth(b)
  

Applicable situation:

Used on vertical and horizontal surface, bearing strong strength of side direction.

Surface treatment

• Hot-Dip Galvanizing, Thickness Of Zinc Layer(80—120)ΜM.
• Multi-Element Alloy Permeation+Dacromet
• Hot-Dip Galvanizing/Multi-Element Alloy Permeation+Nano-Coating+ Alkali-Resistance Coating. NSS(Neutral Salt Spray) Test Of Over 2400 Hrs.
• Hot-Dip Galvanizing/Multi-Element Alloy Permeation+Nano-Coating+ Closed Insulating Layer. NSS(Neutral Salt Spray) Test Of Over 2400 Hrs.

Filling and package

Contains a cover on each end 43Filling in channel body with foam strips

Close the notch with regular or foam tape

Applicable Industry

• Railway bridge
• Bridge
• Building Structure
• Glass Curtain Wall